7 1/2" Gauge Beam Engine and Tender

7 1/2" gauge 4+4 Beam Engine and tender with two 7 1/2 foot bench type riding cars equipped with Tom Bee trucks and couplers. Pneumatic brakes on all cars. Current SVLSRM boiler certificate on a 12" diameter vertical steel boiler, propane fired, with 306 3/8" diameter copper fire tubes. Twin cylinder double acting engine with Stephenson valve gear and a bore and stroke of 2"x2.75" driving 4.375" diameter wheels through a 20% overdrive. Drive chains are tight at all times.

There is a constant speed universal joint in the center of each truck to allow movement while keeping the drive chains tight. The engine weighs about 400 pounds with eight driving wheels arranged in two four wheel trucks. I haven't found a track or turn I couldn't handle at normal track speed. The suspension is very flexible, rock solid on the rails and the engine has a working headlight. This engine is a runner, fast, with exceptional pulling power and is very easy to run, very forgiving. You can check and adjust either firing or water level in about two seconds. Because of having a vertical boiler the engine does not require any additional inputs to fire up, just open the valve on the propane tank and light the burner after you fill the boiler and the water tank with water.

Click on a picture to see the larger version

The train is set-up on a new two wheel trailer for towing with a car or small pick-up truck. I estimate the weight of the complete train and trailer at about 1000 pounds. The train and trailer are located in Reno, Nevada.

Price Reduced - Asking $10,000

Contact Bill Cody at (775) 674-6512 or steamboatbill@sbcglobal.net for additional information/pictures.

For more info mail to Webmaster